Description:CCD AGC problem After AGC, correct input is not obtained at CCD.
Causes:
Poor contact in the connector terminals. Defective exposure lamp. Defective PWB.
Remedy:
Poor contact in the connector terminals. Check the connection of connector on the SHD PWB and the connector on the CCD PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective exposure lamp. Replace the exposure lamp or inverter PWB. Defective PWB. Replace the SHD PWB or CCD PWB and check for correct operation.
اتصل بنا
شركة المنار
الصيانة : 01149459097
م.سيد: 01006242164
م.مصطفي : 01064600972
العنوان / اسوان -طريق الخزان - بجوار جامع الرضوان
ليست هناك تعليقات:
إرسال تعليق